1. First, soak the dry cloth in water and clean it once, then fully wring the water dry. Use a hair dryer to blow it dry for 9 minutes, and then clean the silicone product inside and outside first.
If there is dirt or dust on the silicone product, use a small toothbrush to stick some toothpaste to clean it. If there is oil stains, use a toothbrush to stick some detergent to clean it.
3. If there are strong adhesive stains such as glue on silicone products, use a cotton swab to apply a small amount of wind oil essence evenly to the stains, and then use a small toothbrush to clean them, which can remove stubborn stains.
4. Finally, everyone is using a dry cloth to dry the silicone product, and using a hair dryer to blow dry with cold air.
How to wash silicone products if they are dirty?
When cleaning silicone products, many cleaning agents can be used, such as detergent, toothpaste, wind oil essence, white electric oil, alcohol, etc. Of course, the functions of various cleaning agents are also different. Generally, in daily life, we do not have any special tools to use detergent, laundry detergent, toothpaste to clean. Soak the silicone product in clean water for about ten minutes, use a damp cloth to apply cleaning agent, wring it dry, and then wipe it inside and outside, You can also use a toothbrush to clean areas that cannot be wiped with dirt. Then, use a hair dryer to blow them to a certain degree of dryness. Do not blow them too dry or too wet. If you blow them too often, they can easily cause cracks. If you do not blow them dry, they can easily change color if left in a damp place for too long. After blowing them dry, do not expose them to the sun, as this can also cause discoloration or deformation, resulting in insufficient tension. Problems such as decreased rebound force.
How to maintain silicone products?
1. When using silicone material, do not come into contact with sharp objects to avoid cutting.
2. It cannot be placed in places with high fire and heat, as it is prone to burning.
3. Don’t use heavy objects to accumulate or twist.
4. During use, if cleaning is necessary, dry cleaning can be used as much as possible, wiping with a dust-free cloth, or directly washing and drying in warm water before placing in a ventilated place.
5. Stains can also be cleaned with toothpaste. It should be noted that silicone products are not easy to clean, so do not easily clean, wipe, or expose to sunlight.
6. Silicone material with static electricity belongs to high adsorption products, so try not to place it in areas with a lot of hair and dust, otherwise cleaning will be very troublesome!
For example:
Silicone products need to be prepared for cleaning and maintenance: water basin, white vinegar, silicone phone case, water, toothpaste, and toothbrush.
1. Firstly, put the silicone phone case into the water basin and pour in white vinegar, as shown in the picture.
2. Next, take out a tube of toothpaste and squeeze an appropriate amount of toothpaste into the silicone phone case as shown in the figure below.
3. Next, pour an appropriate amount of clean water into the water basin, as shown in the following figure.
4. Then take out a toothbrush and brush the silicone phone case as shown in the following picture.
5. Finally, as shown in the figure, the silicone phone case has been cleaned and maintained.
Post time: Apr-18-2023